For coins
GoldScreenSensor
Goldanalytix GoldScreenSensor – the product features at a glance: Gold test device for quick and simple authenticity tests of gold and silver Suited for coins and ingots from about 1/4 ounce up to one ounce / 50g (also in capsules or blisters) Simplyfied measurement mode supports by alloy assignment Immediately identifies also the frequent and very dangerous counterfeits made of tungsten or tungsten alloys (this material has the same density as gold) Suited for mobile applications - fits in almost every pocket! You want to be sure that all that glitters really is gold (or silver) and not be victim of one of the numerous precious metal forgers? If the answer is yes, the GoldScreenSensor by Goldanalytix is the correct precious metal tester for you. This electronic gold tester for the pervading authenticity test of precious metals gives you safety when trading precious objects. The GoldScreenSensor establishes the genuineness of precious metal coins or ingots within seconds - even through caspules and blisters. The test is simple and straightforward: 1. Place object on the sensor field; 2. Wait for the result (gold and silver alloys, platinum, palladium or typical materials of counterfeits are displayed); The application fields are numerous: for precious metal traders, for bancs, for private sellers, second-hand markets and all other occasions of the precious metal trade. The advantages of the "GoldScreenSensor gold test device" are among others: + quick and pervading authenticity test (goes through gold layers that often are plated on the outside and discovers the counterfeit core) + avoidance of high financial losses caused by buying false gold or silver + avoidance of legal consequences (those who sell counterfeit precious metals have to prove that they haven't been put them into circulation) Perfect for buying and selling precious metals! If you are not sure about some objects or the result are not as expected, you can find out the nature of these objects by using the conductivity charts. The penetration depths depend on the metals' electrical conductivity - up to 650 µm on each side in case of .900/.916 gold - so in total 1.3 mm, about 250 µm for pure silver and 350 µm for pure gold. Thanks to the analysis of numerous counterfeits, we know that the GoldScreenSensor is suited for objects up to 50 grams, for which the thickness is the limitin factor. The GoldScreenSensor can test coins from 1/4 ounce on and bars from 10 grams on (The measuring coil has to be fully covered). For smaller and/or unevenly shaped objects (nuggets, scrap metal, dental gold and so on), we recommend our "GoldScreenPen". Scope of delivery: GoldScreenSensor Calibration piece made of copper Charger Detailed instruction manual Practical padded case Quick quide on the device's reverse side Instruction manual: GoldScreenSensorImportant Information on the GoldScreenSensor Manufacturer/Responsible person for the EU: MARAWE GmbH & Co. KGAn der Irler Höhe 3BD-93055 Regensburg, Germany+49 941 37847200info@marawe.de
GoldScreenPen
Goldanalytix GoldScreenPen – the product features at a glance: Reliably detect typical counterfeits: Testing device for quick and easy authenticity testing of gold, silver and other (precious) metals Equipped with the smallest measuring tip: Ideal for measuring small and irregularly shaped objects Suitable for coins and small bars up to approx. 1 ounce Non-destructive, penetrating measurement (up to 0.7 mm!) of the electrical conductivity Also suitable for use in the recycling sector and for testing silver cutlery The proven GoldScreenPen from Goldanalytix - now in a new design! Gain certainty about the authenticity of your gold coins and gold bars and protect yourself from the numerous counterfeits on the market. The GoldScreenPen combines the latest technology with a fresh design and is your reliable companion for precious metal testing. With the GoldScreenPen, you can quickly and precisely check the authenticity of coins and bars made of gold, silver and other precious metals - also through thin foils. The device measures the electrical conductivity of your test object, which allows you to clearly distinguish, for example, between the particularly tricky counterfeits made of tungsten and genuine fine gold coins. The measuring pen is equipped with one of the world's smallest sensor coils, making the GoldScreenPen ideal for testing small and irregularly shaped objects. The measurement is carried out exclusively with the measuring pen; the measuring surface is purely decorative. The GoldScreenPen is suitable for both commercial and private users and impresses with its simple and intuitive operation. It can be used for a wide range of applications. Whether at precious metal dealers, antique markets or in recycling and disposal companies - the GoldScreenPen is mobile and delivers quick results on the material properties of your test objects. The penetration depth of the GoldScreenPen depends on the conductivity of the materials and limits the material thickness that can be penetrated. We recommend the GoldScreenPen for objects up to approx. 1 ounce. Please note: For a comprehensive authenticity test, it is always necessary to use other test methods in addition to the measurement with the GoldScreenPen, such as checking the density. Detailed information can be found in the instruction manual. The GoldScreenPen from Goldanalytix is the ideal tool for all those who do not want to leave anything to chance when it comes to the authenticity testing of (precious) metals and are looking for maximum security! Scope of delivery: GoldScreenPen (Language selection: German, English, Spanish, French) Probe pen Jack cable Probe pen holder Charger USB-C Detailed instruction manual Practical, padded carrying case Shipping carton Instruction manual: GoldScreenPen Manufacturer/Responsible person for the EU: MARAWE GmbH & Co. KGAn der Irler Höhe 3BD-93055 Regensburg, Germany+49 941 37847200info@marawe.de
MagneticScreenScale
Goldanalytix MagneticScreenScale – the product features at a glance: quick authenticity test of gold and silver can also measure through capsules, blisters and plastic films about 3 mm penetration depth into gold and silver our magnetic scales - the fastest tungsten detector Measure objects of up to 250 g Tungsten forgings are dangerous! Tungsten has the same specific density as gold and is therefore the perfect forging material for gold ingots and -coins. The MagneticScreenScale lets you detect such forgings quickly and with certainty. The scales' strong magnetic field penetrates the ingot's or coin's core deeply without destroying it. Tungsten can be discovered until 3 mm below the golden surface! The biggest advantage of the magnetic scales is that it detects tungsten occlusions in fine gold (99.99 % gold). The information here is always unambiguous and tungsten inclusions are still detected under a gold layer of up to 3 mm with complete reliability. In comparison, an expensive XRF-device can only pervade 0.010 mm into gold. That means that the magnetic scales measure about 300 times more deeply into the metal. That's why the magnetic scales are ideal for testing the authenticity of investment gold (ingots, coins, etc.) in a high troughput. Thanks to its accumulator, the scales can be run in places without mains power and is a perfect assistant when purchasing investment gold. But also many kinds of forging silver, as well as forgings of platinum or palladium can be discovered. Particularly convenient: the testing samples don't need to be taken out of its plastic blisters, plastic films or capsules (when they are not extraordinarily thick). That means that also small investment ingots that are firmly welded can be examined fast and with high certainty. Even jewellery can be tested regarding the often used tungsten carbide cores. You'll obtain the magnetic scales in a noble and robust aluminium carry case. Purchase the original from us - the proven and reliable solution to testing gold. Scope of delivery: MagneticScreenScale Instruction manual Small extra-magnet Reference-object Anti-static spray Delivery in handy aluminium case Instruction manual: MagneticScreenScaleInformation sheet Safe Handling of the magnetic measurement head Manufacturer/Responsible person for the EU: MARAWE GmbH & Co. KGAn der Irler Höhe 3BD-93055 Regensburg, Germany+49 941 37847200info@marawe.de
Precision Balance
Goldanalytix Precision Balance – the product features at a glance: Highly precise - ideal for precious metals (0.01 g) Capacity up to 300 g LCD display with background lighting Measurement in different units available Tare function included The Precision Balance by Goldanalytix is a important measuring instrument to find out the true weight of precious metal coins and bars. Some fakes - e.g. the ones made from copper - can be detected easily when using the Precision Balance in combination with the Digital Caliper. This will enable you to estimate the density of coins or cuboid objects like bars. For precious metal professionals and beginners the Precision Balance and the Digital Caliper are must-have equipement when buying and selling coins and bars. The Precision Balance has a high accuracy, the taring function and a well readable LCD display which makes it perfect for measuring precious metals. With its measuring range from 0 to 300 g it is suitable for all commong coins and bars. Check the weight, thickness, width and length or diameter of the object and compare the values to the official measurements given by the manufacturers. Scope of delivery: Precision Balance (incl. 2x AAA batteries) Coins in the product pictures are not included! Manufacturer/Responsible person for the EU: G&G GmbHNovesiastr. 31D-41564 Kaarst, Germany+4921311335605info@gandg.de
Digital Caliper
Goldanalytix Digital Caliper – the product features at a glance: Must-have equipement to verify coins and bars Easy to use and precise measurements Helps to detect many simple counterfeits Well readable LCD-display Measuring range from 0 to 150 mm The Digital Caliper by Goldanalytix is a important measuring instrument to find out the true diameter, thickness or other measurements of precious metal coins and bars. Some fakes - e.g. the ones made from copper - can be detected easily when using the Digital Caliper in combination with the Precision Balance. This will enable you to estimate the density of coins or cuboid objects like bars. For precious metal professionals and beginners the Digital Caliper and the Precision Balance are the must have equipement when buying and selling coins and bars. The Digital Caliper has a high accuracy, the very important taring function and a well readable LCD display which makes it perfect for measuring precious metals. With its measuring range from 0 to 150 mm it is suitable for all commong coins and bars. Check the thickness, width and length or diameter of the object and compare the values to the official measurements given by the manufacturers. Scope of delivery: Digital Caliper (without CR2032 coin cell) Coins in the product pictures are not included! Manufacturer/Responsible person for the EU: Willy Kunzer GmbHRömerstr. 17D-85661 Forstinning, Germany+4981212200info@kunzer.de